manualshive.com logo in svg

Yamaha KODIAK 450 Ultramatic, Руководство пользователя

Поделиться
Скачать
Yamaha KODIAK 450 Ultramatic Скачать руководство пользователя страница 135

8-22

NOTE:

_ 

●

If water is added, have a Yamaha dealer
check the antifreeze content of the cool-
ant as soon as possible. 

●

The radiator fan operation is completely
automatic. It is switched on or off accord-
ing to the coolant temperature in the radi-
ator. 

_

If your ATV overheats, see page 8-55 for de-
tails.

EBU00887*

Changing the coolant 

WARNING

POTENTIAL HAZARD 
Removing the radiator cap when the en-
gine and radiator are still hot. 
WHAT CAN HAPPEN 
You could be burned by hot fluid and
steam blown out under pressure. 
HOW TO AVOID THE HAZARD 
Wait for the engine to cool before re-
moving the radiator cap. Always use a
thick rag over the cap. Allow any re-
maining pressure to escape before
completely removing the cap.

U5ND10.book  Page 22  Friday, March 8, 2002  11:47 AM

Содержание KODIAK 450 Ultramatic






























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды