manualshive.com logo in svg

Yamaha KODIAK 450 2021, Руководство пользователя, Страница: 151 / 172

Поделиться
Скачать
Yamaha KODIAK 450 2021 Скачать руководство пользователя страница 151

9-61

9

3. Remove the socket by pushing it in and turn-

ing it counterclockwise.

4. Remove the burnt-out bulb.
5. Place a new bulb into position. 

NOTICE:

 Do

not touch the glass part of the bulb. Oil
from your fingers or other contamination
will adversely affect the transparency of
the glass, luminosity of the bulb, and bulb
life. Thoroughly clean off any dirt and fin-
gerprints using a cloth moistened with al-
cohol or thinner.

 [ECB00653]

6. Install the socket by pushing it in and turning

it clockwise.

7. Install the bulb cover. 

NOTICE:

 Make sure

the bulb cover is securely fitted over the
socket and seated properly.

 [ECB03320]

1. Bulb cover

1. Socket

1

1

1. Do not touch the glass part of the bulb.

1

UBEY60E0.book  Page 61  Monday, July 27, 2020  10:46 AM

Содержание KODIAK 450 2021













































































































































































Отзывы:

Нет отзывов