Yamaha KODIAK 450 2020, Руководство пользователя

Страница: 147 / 174

8-55
8
NOTICE
ECB00622
Never attempt to open the battery or remove
the battery cell seals, as this would permanent-
ly damage the battery.
To charge the battery

Confirm the recommended charging rate as
specified on the battery itself.

Select a suitable charger and follow the manu-
facturer’s instructions.
NOTICE
ECB00933
To charge a VRLA (valve-regulated lead-acid)
battery, a special battery charger is required.
Using a conventional battery charger will dam-
age the battery.
To store the battery

If the ATV will not be used for more than one
month, remove the battery, fully charge it, and
then place it in a cool, dry place.

If the battery will be stored for more than two
months, check it at least once a month and fully
charge it if necessary.
NOTICE
ECB00942

Always keep the battery charged. Storing the
battery in a discharged state for an extended
period of time will cause permanent battery
damage.

Do not store the battery in an excessively
cold or warm place [below freezing or above
30 °C (90 °F)].
To install the battery
1. Place the battery in its compartment.
NOTICE:
When installing the battery, the
main switch must be off, and the positive
lead must be connected before the nega-
tive lead.
[ECB01111]
2. Connect the positive battery lead first, then
connect the negative battery lead by installing
their bolt.
UBB562E0.book Page 55 Thursday, March 14, 2019 9:59 AM