Yamaha KODIAK 400, Руководство пользователя

Страница: 137 / 193

8-27
11. Install the coolant reservoir hose.
12. Pour the recommended coolant into the
reservoir to the maximum level mark, and
then install the reservoir cap and panel D.
13. Pour the recommended coolant into the
radiator until it is full, and then install the
radiator cap.
CAUTION:
_
Hard water or salt water is harmful to the
engine. You may use soft water if you can-
not get distilled water.
_
14. Start the engine and let it idle for several
minutes. Stop the engine, and then
check the coolant level in the radiator. If it
is low, add more coolant until it reaches
the top of the radiator.
15. Check for coolant leakage.
NOTE:
_
If any leakage is found, have a Yamaha deal-
er check the cooling system.
_
16. Install the panels and the front carrier.
Recommended antifreeze:
High quality ethylene glycol antifreeze
containing corrosion inhibitors for
aluminum engines.
Antifreeze and water mixing ratio:
1:1
Total amount:
1.32 L (1.16 Imp qt, 1.40 US qt)
Coolant reservoir capacity
(up to the maximum level mark):
0.25 L (0.22 Imp qt, 0.26 US qt)
U1P110.book Page 27 Thursday, May 27, 2004 10:08 AM