background image

 

HY144-D Firmware Update Guide 

 

Thank you for choosing a Yamaha product. 
This guide explains how to update the built-in Dante module firmware (Dante firmware) integrated in 
the HY144-D. 
 

  Precautions (Please be sure to read this section first!) 

・ 

The user assumes full responsibility for the update. 

・ 

Update the firmware components one unit at a time. 

・ 

Please note that the device may be damaged if you fail to follow these instructions properly, or 

turn off the device or disconnect the cable while the update is in progress.   

・ 

If the update fails, and the device still does not operate correctly even after you execute the update 

once again, please contact your Yamaha dealer.   

・ 

Yamaha Corporation owns exclusive copyrights for this update guide.   

・ 

Audinate owns exclusive copyrights for the Dante firmware and its update program. 

・ 

It is prohibited to duplicate or modify the firmware, software or guides, in part or in their entirety, 

without permission from the copyright owner. 

・ 

The screen shots in this guide are for use with this update procedure only and may be different 

from the actual screen shots.   

・ 

Dante is a registered trademark of Audinate. 

・ 

Windows is a registered trademark of Microsoft ® Corporation in the United States and other 

countries. 

・ 

Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. 

・ 

The company names and product names in this document are the trademarks or registered 

trademarks of their respective companies. 

Содержание HY144-D














Отзывы: