92
En
Advanced setup
■
SCENE IR code setting
SCENE IR
Use this feature to output the remote control signals at the
REMOTE OUT jack automatically when this unit is in the
SCENE mode.
Choices:
ON
, OFF
• Select “ON” when the component connected to the
REMOTE OUT jack is the Yamaha component and has
the capability of the SCENE control signals. This unit
automatically sends the remote control signals to the
component.
• Select “OFF” when the component connected to the
REMOTE OUT jack is not the Yamaha component and
does not have the capability of the SCENE control
signals.
• If the component connected to the REMOTE OUT jack
is not the Yamaha product and “SCENE IR” is set to
“ON”, noise may be output. In such cases, set ‘SCENE
IR” to “OFF”.
If noises are output when you operate the SCENE function, set
“SCENE IR” to “OFF”.
■
Bi-amplifier setting
BI-AMP
Use this feature to activate or deactivate the bi-amplifier
function (see page 14).
Choices: ON,
OFF
• Select “ON” if you want to activate the bi-amplifier
function. “SUR. B L/R SP” is set to NONE”
automatically, and this unit outputs the front channel
audio signals at the SURROUND BACK speaker
terminals.
• Select “OFF” if you want to deactivate the bi-amplifier
function.
When “BI-AMP” is set to “ON”, you can only select “FRONT B”
or “NONE” in “EXTRA SP ASSIGN” (see page 72).
See page 89 for the operation of the advanced setup.
Note
Note
