background image

36

 En

FM/AM tuning

You can tune into any desired station simply by selecting 
the preset station group and number under which it was 
stored.

y

When performing this operation with the remote control, press 

C

TUNER

 to select “TUNER” as the input source.

1

Press 

4

A/B/C/D/E

 (or 

G

A/B/C/D/E

 

l

 / 

h

repeatedly to select the desired preset 
station group (A to E).

The preset station group letter appears in the front 
panel display and changes each time you press the 
button.

2

Press 

5

PRESET/TUNING

 

l

 / 

h

 (or 

G

PRESET/CH

 

k

 / 

n

) to select the desired 

preset station number (1 to 8).

The preset station group and number appear in the 
front panel display along with the station band and 
frequency.

y

You can select the desired preset station number (1 to 8) directly 
by pressing the numeric buttons on the remote control.

You can exchange the assignments of two preset stations 
with each other. The example below describes the 
procedure to exchange preset station “E1” with “A5”.

1

Select preset station “E1” using 

4

A/B/C/D/E

 

and 

5

PRESET/TUNING

 

l

 / 

h

.

See “Selecting preset stations” on this page.

2

Press and hold 

2

PRESET/TUNING

 for 

more than 3 seconds.

“E1” and the MEMORY indicator flash in the front 
panel display.

3

Select preset station “A5” using 

4

A/B/C/D/

E

 and 

5

PRESET/TUNING

 

l

 / 

h

.

“A5” and the MEMORY indicator flash in the front 
panel display.
See “Selecting preset stations” on this page.

4

Press 

2

PRESET/TUNING

 again.

“EDIT E1–A5” appears in the front panel display and 
the assignments of the two preset stations are 
exchanged.

Selecting preset stations

:

E1 FM 87.5 MHz

Exchanging preset stations

MEMORY

:

E1 FM 87.5 MHz

Flashes

Flashes

MEMORY

:

A5 FM 90.7 MHz

Flashes

Flashes

Содержание HTR-6025










































































Отзывы: