Yamaha HTR-5960 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 128

background image

45

USING AUDIO FEATURES

BA

S

IC

OPE

R

A

T

IO

N

You can mix down multi-channel sources to 2 channels
and enjoy playback in 2-channel stereo.

Set the component selector switch to AMP and
then press STEREO on the remote control
repeatedly to select “2ch Stereo”.

y

• You can use a subwoofer with this program when “LFE/BASS

OUT” is set to “SWFR” or “BOTH” (see page 88).

• You can also select the “2ch Stereo” mode by rotating the

PROGRAM selector on the front panel.

When this unit is in the “STRAIGHT” mode, 2-channel
stereo sources are output from only the front left and right
speakers. Multi-channel sources are decoded straight into
the appropriate channels without any additional effect
processing.

1

Set the component selector switch to AMP
and then press STRAIGHT on the remote
control to select “STRAIGHT”.

2

To deactivate the “STRAIGHT” mode, press
STRAIGHT on the remote control again so
that “STRAIGHT” disappears from the front
panel display.

The sound effect is turned back on.

y

You can also select the “STRAIGHT” mode by pressing
STRAIGHT (EFFECT) on the front panel.

The Pure Direct mode turns off the video circuitry and the
front panel display, allowing sources to bypass the
decoders and DSP processors of this unit so that you can
enjoy pure hi-fi sound from 2-channel PCM and analog
sources.

Press PURE DIRECT on the front panel (or set
the component selector switch to AMP and then
press PURE DIRECT on the remote control) to
turn on or off the Pure Direct mode.

• To avoid unexpected noise, do not play CDs encoded in DTS

when this unit is in the Pure Direct mode.

• When multi-channel signals (Dolby Digital and DTS) are input,

this unit automatically switches to the corresponding analog
input. When “DTS” is selected as the input mode (see page 41),
no sound will be output.

• No sound will be output from the subwoofer.
• The front panel display automatically dims.
• The following operations are not possible when this unit is in

the Pure Direct mode:
– switching the sound field program
– displaying the OSD
– adjusting the “SET MENU” parameters (except for speaker

level settings)

– operating video functions (video conversion, etc.)

• The Pure Direct mode is automatically canceled whenever this

unit is turned off.

y

• The indicator around the PURE DIRECT button on the front

panel lights up while this unit is in the Pure Direct mode.

• The front panel display turns on momentarily when an

operation is performed.

Enjoying multi-channel sources in
2-channel stereo

Enjoying unprocessed input
sources

STEREO

1

AMP

SOURCE

TV

2ch Stereo

EFFECT

STRAIGHT

ENT.

AMP

SOURCE

TV

STRAIGHT

Enjoying pure hi-fi stereo sound

Notes

AMP

SOURCE

TV

PURE DIRECT

8

PURE DIRECT

Front panel

Remote control

or

«
...
47
48
49
50
51
...
»

Содержание HTR-5960

































































































































Отзывы:

Нет отзывов

Похожие инструкции для HTR-5960

Бренд: Harman Kardon Страницы: 2

Бренд: Harman Kardon Страницы: 44

Бренд: Harman Kardon Страницы: 176

Бренд: Harman Kardon Страницы: 3

Stage-100 Series

Бренд: Parallel Audio Страницы: 12

MultiView NEC 600

Бренд: Magenta Страницы: 16

Бренд: Fisher Страницы: 14

Бренд: Rock Mars Страницы: 18

Campersat Autoseek Autoskew System 4441

Бренд: Campersat Страницы: 14

Бренд: sunair Страницы: 188

Бренд: Boss Страницы: 21

Rollixo Smart io

Бренд: SOMFY Страницы: 92

Бренд: Sangean Страницы: 48

Бренд: B&K Страницы: 88

Бренд: Icom Страницы: 96

Бренд: Grundig Страницы: 50

Бренд: Boss Audio Systems Страницы: 8

Бренд: NAD Страницы: 46

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды