Yamaha HTR-3065 Скачать руководство пользователя страница 72

Страница: 72 / 83

APPENDIX

➤

Error indications on the front display

Error indications on the front display

Message

Cause

Remedy

Access error

The unit cannot access the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

The unit cannot access the iPod.

Turn off the iPod and turn it on again.

Check SP Wires

The speaker cables short circuit.

Twist the bare wires of the cables firmly and connect to the unit and speakers properly.

Connect error

The unit has detected the iPod, but cannot access it.

Turn off the iPod and then turn it on again.

Internal Error

An internal error has occurred.

Contact the nearest authorized Yamaha dealer or service center.

No content

There are no playable files in the selected folder.

Select a folder that contains files supported by the unit.

RemID Mismatch

The remote control IDs of the unit and the remote control are not
identical.

Change the remote control ID of the unit or the remote control (p.65).

Unable to play

The unit cannot play back the songs stored on the iPod for some
reason.

Check the song data. If it cannot be played on the iPod itself, the song data or storage area may be
defective.

Unknown iPod

The connected iPod is not supported by the unit.

Use an iPod supported by the unit (p.44).

USB Overloaded

An overcurrent is flowing through the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

Содержание HTR-3065




















































































Результаты поиска

Содержание HTR-3065

Отзывы:

Похожие инструкции для HTR-3065

Бренды по названию

Популярные бренды

Yamaha HTR-3065, Руководство пользователя

Результаты поиска

Содержание HTR-3065

Отзывы:

Похожие инструкции для HTR-3065

Бренды по названию

Популярные бренды