Yamaha GX-900 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 61

background image

E-2

Precautions: Read this before operating your system

IMPORTANT

Please record the serial number of this system in the space
below.

Model:

Serial No.:

The serial number is located on the rear of the main unit.
Retain this Owner’s Manual in a safe place for future
reference.

WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.

WARNING

To reduce the risk of fire or electric shock, do not expose this
system to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.

CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.

As the laser beam used in this system is harmful to the
eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.

This system is classified as a
CLASS 1 LASER product.
The CLASS 1 LASER
PRODUCT label is located on
the rear exterior.

CLASS 1 LASER PRODUCT

Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.

CAUTION FOR CARRYING THE MAIN UNIT
Be sure not to carry or tip the main unit with discs
remaining in it.

CAUTION FOR MOVING THE MAIN UNIT
Before moving the main unit, first remove all compact
discs from the disc tray and close the tray by pressing the
OPEN/CLOSE button. After you confirm that “NO DISC”
lights up on the display, turn this system into the standby
mode by pressing the STANDBY/ON switch, and then
disconnect the power plug from the AC outlet.

For U.K. customers

If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL
Brown: LIVE

As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED. Making sure that neither core is
connected to the earth terminal of the three pin plug.

«
...
8
9
10
11
12
...
»

Содержание GX-900






























































Отзывы:

Нет отзывов

Похожие инструкции для GX-900

Бренд: NEC Страницы: 32

Бренд: Panasonic Страницы: 41

Бренд: M-E Страницы: 20

Бренд: M-Audio Страницы: 12

Magnum Alert-700

Бренд: NAPCO Страницы: 52

Бренд: Polk Mono Страницы: 86

Бренд: Fisher Страницы: 14

Magnavox FW 55C

Бренд: Magnavox Страницы: 80

LAMP MEMORY INTERCOM NEM-10/C

Бренд: Aiphone Страницы: 16

Бренд: Uniden Страницы: 66

Бренд: Grundfos Страницы: 27

Ghost Beat SY-1245

Бренд: Sytech Страницы: 5

Бренд: Eaton Страницы: 7

Бренд: Ibiza sound Страницы: 40

Бренд: G-project Страницы: 20

Бренд: Laser Страницы: 3

StorageWorks DS-BA35X-MN

Бренд: Digital Equipment Страницы: 2

OPTIUTA10B Optidrive Series

Бренд: Lanzar Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды