Yamaha GX-707 Скачать руководство пользователя страница 15

Страница: 15 / 52

-5

English

Preparations and connections

Turn the remote control over and remove the battery
compartment cover by sliding it in the direction of the

mark.

Insert the batteries (AA, R6, UM-3 type) according to the
polarity markings on the inside of the battery compartment.

Attach the battery compartment cover.

Notes

• Be sure the polarities are correct. (see the illustration inside the battery

compartment.)

• Remove the batteries if the remote control is not used for an extended

period of time.

• If batteries leak, dispose of them immediately. Avoid touching the leaked

material or letting it come in contact with clothing, etc. Clean the battery
compartment thoroughly before installing new batteries.

• Be sure to use the same type of batteries.
• Do not use a new battery and an old battery together.

Notes

• The area between the remote control and the main unit must be clear of

large obstacles.

• Do not expose the remote control sensor to strong lighting, in particular,

an inverter type fluorescent lamp. Otherwise, the remote control may not
work properly. If necessary, position the main unit away from direct
lighting.

Battery replacement

If you find that the remote control must be used closer to the main
unit, the batteries are weak. Replace both batteries with new ones.

DISC

OPEN/ CLOSE

DISC CHANGE

DISC

3–DISC CD CHANGER

STANDBY

/ON

STANDBY

TIMER

PROGRAM

B.BOOST

MUSIC

INPUT

PRESET/TUNING/BAND

A/B/C/D/E

VOLUME

DOWN

DIRECTION

AUTO REVERSE CASSETTE DECK

MINI COMPONENT SYSTEM GX–707

DOLBY B NR

OPEN/ CLOSE

DOLBY SURROUND

P R O • L O G I C

DIGITAL AUDIO

0.2 m – 6 m

(8” – 20’)

Installing batteries in the remote control

Remote control operation range

Содержание GX-707





















































Результаты поиска

Содержание GX-707

Отзывы:

Похожие инструкции для GX-707

Бренды по названию

Популярные бренды

Yamaha GX-707, Руководство пользователя

Результаты поиска

Содержание GX-707

Отзывы:

Похожие инструкции для GX-707

Бренды по названию

Популярные бренды