E
-8
Setting the clock
1
While the power is on, press
DISPLAY
to display time.
2
While holding down
TIME ADJ
, press
HOUR
and set the hour.
* Press
HOUR
once to advance the time by 1 hour. Press and
hold to advance continuously.
3
While holding down
TIME ADJ
, press
MIN
and set the minute.
* Press
MIN
once to advance the time by 1 minute. Press and
hold to advance continuously.
* The hour setting will not advance even if minute is advanced
from “59” to “00”.
Note
In the event of a power failure or when the AC supply lead is disconnected,
the time display will go out; however, the clock will function for about 5
minutes without any power supply. Otherwise, the time display will flash
on and off to indicate that time must be reset.
Adjusting brightness of the display
If desired, you can adjust the brightness of the display.
Press and hold
DISPLAY
for more than 2 seconds so that
“DIMMER ±0” appears on the display.
While holding down
DISPLAY
, turn
VOLUME
clockwise to
increase or counterclockwise to decrease brightness.
Control range: ±0 to –6 (Preset value: ±0)
Preparations and connections
DISC
3
OPEN/ CLOSE
DISC CHANGE
DISC
2
DISC
1
3–DISC CD CHANGER
STANDBY
/ON
STANDBY
TIMER
YMERSION
B.BOOST
MUSIC
INPUT
PRESET/TUNING/BAND
A/B/C/D/E
/
VOLUME
UP
DOWN
DIRECTION
AUTO REVERSE CASSETTE DECK
DOLBY B NR
OPEN/ CLOSE
PHONES
BASS
TREBLE
MODE
DOLBY NR
REC/
PAUSE
AUTO/
MANUAL
TIMER
MEMORY
TIME ADJ
RANDOM
HOUR
REPEAT
TIME
DISPLAY
MIN
PTY SELECT
R.D.S
FREQ PS/
PTY/RT/CT
MODE – PTY SEEK – START
DIGITAL AUDIO
1
2
3
DISPLAY
MEMORY RANDOM
TIME ADJ
REPEAT
HOUR
MIN
MEMORY RANDOM
TIME ADJ
REPEAT
HOUR
MIN
FREQ PS/
PTY/RT/CT
MODE –
FREQ PS/
PTY/RT/CT
MODE –
Changes.
Changes.
OPEN/ CLOSE
DISC CHANGE
YMERSION
B.BOOST
MUSIC
VOLUME
UP
DOWN
Y
RANDOM
HOUR
REPEAT
TIME
DISPLAY
MIN
FREQ PS/
PTY/RT/CT
MODE – PTY SEEK – START
DIGITAL AUDIO
VOLUME
DISPLAY