manualshive.com logo in svg

Yamaha GRIZZLY YFM70GPXH, Руководство пользователя

Поделиться
Скачать
Yamaha GRIZZLY YFM70GPXH Скачать руководство пользователя страница 156

8-60

8

4. Remove the burnt-out bulb.
5. Place a new headlight bulb into position.

NOTICE:

 Do not touch the glass part of the

headlight bulb to keep it free from oil, oth-
erwise the transparency of the glass, the
luminosity of the bulb, and the bulb life will
be adversely affected. Thoroughly clean
off any dirt and fingerprints on the head-
light bulb using a cloth moistened with al-
cohol or thinner.

 [ECB00652]

6. Install the socket by pushing it in and turning

it clockwise.

7. Install the bulb cover. 

NOTICE:

 Make sure

the bulb cover is securely fitted over the
socket and seated properly.

 [ECB03320]

8. Install the headlight cover as shown, and then

install the quick fasteners.

9. Adjust the headlight beam if necessary.

Left and right headlights

This model is equipped with LED-type headlights
for the left and right headlights.
If the left or right headlight does not come on, have
a Yamaha dealer check it.

1. Do not touch the glass part of the bulb.

1

1. Headlight cover

1

U2UD61E0.book  Page 60  Monday, April 25, 2016  10:55 AM

Содержание GRIZZLY YFM70GPXH















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды