Yamaha GRIZZLY YFM70GDXG, Руководство пользователя

Страница: 38 / 176

4-5
4
EBU30496
Multi-function display
The multi-function display is equipped with the
following:

a speedometer

an odometer

two tripmeters (which show the distance trav-
eled since they were last set to zero)

a clock

an hour meter (which shows the total time the
engine has been running)

a fuel meter

a self-diagnosis device
Odometer and tripmeter modes
Pushing the “SELECT” button switches the dis-
play between the odometer mode “ODO” and the
tripmeter modes “TRIP A” and “TRIP B” in the fol-
lowing order:
ODO
→
TRIP A
→
TRIP B
→
ODO
To reset a tripmeter, select it by pushing the “SE-
LECT” button, and then push the “RESET” button
for at least three seconds. The tripmeters can be
used to estimate the distance that can be traveled
with a full tank of fuel. This information will enable
you to plan future fuel stops.
TIP
Pushing and holding in the “SELECT” button, and
turning the key to “
” (on) while the button is
pushed, switches the display between “mph” and
“km/h”.
1. “SELECT” button
2. “RESET” button
3. “CLOCK” button
4. Speedometer
5. Fuel meter
6. Clock/Hour meter
7. Odometer/Tripmeter A/Tripmeter B
4 5
7 6
1
2
3
U2UD60E0.book Page 5 Tuesday, April 28, 2015 11:55 AM