Yamaha GRIZZLY 450 2013 Скачать руководство пользователя страница 151 | Manualshive

Страница: 151 / 174

Yamaha GRIZZLY 450 2013 Скачать руководство пользователя страница 151

8-59

8

3. Remove the headlight bulb holder by pushing

it in and turning it counterclockwise.

4. Remove the burnt-out bulb by pulling it out.
5. Insert a new headlight bulb into the bulb hold-

er by pushing it in.

NOTICE:

Do not touch

the glass part of the headlight bulb to keep
it free from oil, otherwise the transparency
of the glass, the luminosity of the bulb, and
the bulb life will be adversely affected.
Thoroughly clean off any dirt and finger-
prints on the headlight bulb using a cloth
moistened with alcohol or thinner.

[ECB00651]

6. Install the bulb holder by pushing it in and turn-

ing it clockwise.

1. Headlight bulb holder cover

1. Headlight bulb holder

1

1. Do not touch the glass part of the bulb.

U2LC60E0.book Page 59 Friday, March 8, 2013 1:18 PM

«
...
149
150
151
152
153
...
»

Содержание GRIZZLY 450 2013















































































































































































Отзывы:

Нет отзывов