Yamaha GRIZZLY 350 YFM35FGDZ Скачать руководство пользователя страница 45

Страница: 45 / 148

4-19

When storing any documents in the storage com-
partment, be sure to wrap them in a plastic bag so
that they will not get wet. When washing the ATV,
be careful not to let any water enter the storage
compartment.

●

Do not exceed the load limit of 2.0 kg (4 lb) for
the storage compartment.

●

Do not exceed the maximum load of 210.0 kg
(463 lb) for the ATV.

TIP

There is a check hose at the bottom of the storage
compartment. If any water collects in this hose, re-
move the hose, empty it, and then install it.

EBU18962

Front carrier

●

Do not exceed the load limit of 40.0 kg (88 lb) for
the front carrier.

●

Do not exceed the maximum load of 210.0 kg
(463 lb) for the ATV.

EBU18972

Rear carrier

●

Do not exceed the load limit of 80.0 kg (176 lb)
for the rear carrier.

●

Do not exceed the maximum load of 210.0 kg
(463 lb) for the ATV.

1. Storage compartment

1. Storage compartment check hose

U4S263E0.book Page 19 Wednesday, June 10, 2009 2:29 PM

Содержание GRIZZLY 350 YFM35FGDZ





















































































































































Результаты поиска

Содержание GRIZZLY 350 YFM35FGDZ

Отзывы:

Бренды по названию

Популярные бренды

Yamaha GRIZZLY 350 YFM35FGDZ, Руководство пользователя

Результаты поиска

Содержание GRIZZLY 350 YFM35FGDZ

Отзывы:

Бренды по названию

Популярные бренды