Yamaha GRIZZLY 125 YFM125GD Скачать руководство пользователя страница 106

Страница: 106 / 134

8-35

TIP

When checking and adjusting the drive chain
slack, there should be no weight on the ATV and
all tires must be touching the ground.

2. Move the ATV back and forth to locate the

tightest portion of the drive chain, and then
measure the drive chain slack as shown.

3. If the drive chain slack is incorrect, adjust it as

follows.

To adjust the drive chain slack

1. Place the ATV on a level surface.
2. Loosen the hub stopper bolt locknut and then

the hub stopper bolt.

3. Loosen the axle holding bolts.

4. Loosen the drive chain slack adjusting bolt

locknut. To tighten the drive chain, turn the ad-
justing bolt in direction (a). To loosen the drive
chain, turn the adjusting bolt in direction (b),
and then push the wheels forward.

NOTICE:

Improper drive chain slack will overload

Drive chain slack:

30.0 mm (1.18 in)

1. Drive chain slack

1. Hub stopper bolt

2. Hub stopper bolt locknut

3. Axle holding bolt (lower)
4. Axle holding bolt (upper)

U1PY61E0.book Page 35 Wednesday, March 14, 2012 5:22 PM

Содержание GRIZZLY 125 YFM125GD







































































































































Результаты поиска

Содержание GRIZZLY 125 YFM125GD

Отзывы:

Бренды по названию

Популярные бренды

Yamaha GRIZZLY 125 YFM125GD, Руководство пользователя

Результаты поиска

Содержание GRIZZLY 125 YFM125GD

Отзывы:

Бренды по названию

Популярные бренды