8-12
8
TIP
The engine oil should be between the minimum
and maximum level marks.
5. If the engine oil is at or below the minimum
level mark, add sufficient oil of the recom-
mended type to raise it to the correct level.
NOTICE:
Be sure the engine oil is at the
correct level, otherwise engine damage
may result.
[ECB00851]
6. Insert the dipstick into the oil filler hole, and
then tighten the engine oil filler cap.
To change the engine oil
1. Place the ATV on a level surface.
2. Start the engine, warm it up for several min-
utes, and then turn it off.
3. Place an oil pan under the engine to collect
the used oil.
4. Remove the engine oil filler cap, and then re-
move the engine oil drain bolt to drain the oil
from the crankcase.
NOTICE:
When remov-
ing the engine oil drain bolt, the compres-
sion spring, oil strainer and O-ring will fall
out. Take care not to lose these parts.
[ECB00311]
1. Maximum level mark
2. Minimum level mark
1
2
U1PY60E0.book Page 12 Friday, March 11, 2011 9:30 AM
Содержание GRIZZLY 125 YFM125GB
Страница 48: ...7 1 7 EBU21141 RIDING YOUR ATV U1PY60E0 book Page 1 Friday March 11 2011 9 30 AM ...
Страница 131: ...U1PY60E0 book Page 3 Friday March 11 2011 9 30 AM ...
Страница 132: ...PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2011 03 0 2 1 CR E U1PY60E0 book Page 1 Friday March 11 2011 9 30 AM ...