manualshive.com logo in svg

Yamaha GP800Y WaveRunner GP, Руководство владельца/оператора

Поделиться
Скачать
Yamaha GP800Y WaveRunner GP Скачать руководство пользователя страница 61

E

3-11

EJU00461a

STARTING THE ENGINE

w

This product emits exhaust gases which
contain carbon monoxide, a colorless,
odorless gas which may cause brain dam-
age or death when inhaled. Symptoms
include nausea, dizziness, and drowsi-
ness. Operate the vehicle in a open area.

1)

Always make sure the vehicle is
launched and used in waters that are
free from weeds and debris, and in
depths of at least 60 cm (2 feet).

w

Never ride in water that is less than 60
cm (2 feet) deep. You increase your
chance of hitting an underwater obstacle.
You could be injured. Operate at higher
speeds only in deep water free of under
water obstacles.

c

C

Never ride in water that is less than 60cm
(2 feet) deep. Pebbles or sand could be
sucked into the jet intake, causing
impeller damage or engine overheating.

2)

Turn the fuel cock to the “ON” posi-
tion.

NOTE:

Before the first start-up, remove the fuel
tank filler cap to release any built-up pres-
sure in the tank because of fuel expan-
sion.

60 cm (2 ft)

GP7-077

GP7-015

GP7-078

Содержание GP800Y WaveRunner GP
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды