manualshive.com logo in svg

Yamaha GLADIATOR, Руководство пользователя

Поделиться
Скачать
Yamaha GLADIATOR Скачать руководство пользователя страница 75

DO’S AND DON’TS FOR THE MOTORCYCLE

6 Always drive with Starter Lever in OFF position.

7

Use Starter Lever for minimum possible period (1 to 2 minutes) only to start and warm up Engine

(may be required only in winter)

8

If misfiring, get your Motorcycle diagnosed & attended immediately without running even for a KM.

9

Get Motorcycle maintained regularly as per details and schedule given in Owner’s Manual.

10 Get emission of your Motorcycle inspected at least once every 3 months.

11 Please follow good  driven habits in varying traffic conditions.

12 Switch “OFF” the engine while waiting at signal point.

DON’TS  (

)

1. Don’t overload/overspeed your Motorcycle.

2. Don’t alter or modify your Motorcycle.

3. Never drive with Ignition “OFF” while moving down a slope.

4. Don’t turn off the Engine or interrupt the Ignition when the Transmission is in Gear & the Motor

cycle is in motion.

5. Don’t idle the Engine for a prolonged period.

6. Don’t use Non-Genuine Parts.

7. Don’t buy adulterated Petrol/Oil.

2

greenbook.PMD

8/28/2006, 2:24 PM

3

Содержание GLADIATOR














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды