background image

4

 CAUTION

Always follow the basic precautions listed below to avoid the 

possibility of physical injury to you or others, or damage to the 

instrument or other property. These precautions include, but are 

not limited to, the following:

  Location

•  To avoid damage to your instruments wood, finish, or electronic compo-

nents, DO NOT expose this instrument to direct sunlight, high tempera-

tures/humidity or leave stored in an automobile.

•  Do not use close to electronics such as speakers, TV, and radio. The 

instrument’s electronic circuits may cause noise in the TV or radio.

•  Do not place the instrument in an unstable position where it might acciden-

tally fall over.

  Connections

•  Before connecting the instrument to other electronic components, turn off 

the power for all components. Before turning the power on or off for all 

components, set all volume levels to minimum.

•  To prevent the possibility of electrical shock or fire, we recommend using 

great caution when using this instrument in high humidity or wet weather 

environments. We also recommend that you read all Owner’s Manuals for 

the external equipment that you connect this musical instrument to.  

  Handling caution

•  Never hold the instrument close to your face when adjusting or replacing 

strings. A string may unexpectedly break damaging your eyes.

•  If you cut the strings when replacing, do so after sufficiently loosening 

the pegs. Sudden loss of string tension may damage the neck and the 

rebounding strings may cause serious injury.

•  After changing the strings, cut off the leftover string ends. String ends are 

sharp and can cause injuries.

02_EG_om_en_0127.indd   4

16/01/27   20:22

Содержание GIGMAKER
















Отзывы: