Yamaha GCH I 237 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 94

Yamaha GCH I 237 Скачать руководство пользователя страница 31

Control functions

23

position to stop the flow of coolant, since
the carburetor does not need to be
warmed.

ESU14351

Louvers

This snowmobile is equipped with louvers for
ventilation located in the shroud and the low-
er front cover.
The upper left louver has a steel plate that
can be installed or removed depending on
the riding conditions. When operating the
snowmobile in areas where the ambient tem-
perature is 5 °C (41.5 °F) or higher, the steel
plate can be removed as needed by remov-
ing the screws. Before removing the steel
plate, consult a Yamaha dealer.

ESU10682

Passenger grip warmer switch

The passenger grip warmer switch controls
the electrically heated passenger grips.

ESU10832

Storage areas

This snowmobile is equipped with a storage
compartment, storage pouches, rear storage
area, and rear carrier.

Storage compartment

The storage compartment is located under
the rider seat.
Use the storage compartment to store the
tool kit, spare parts, and other small items.
The storage compartment extends under the
fuel tank, so it can also be used to store long
items such as tools.
To open the rider seat, pull the seat latch, and
then slowly raise the seat until it stops.
To close the seat, slowly lower it to its original
position, and then push down on the right
side of the seat to lock it in place.

1. Steel plate
2. Screw

1. Passenger grip warmer switch
2. Off
3. “HI” (high)
4. “LO” (low)

1. Seat latch

U8JES2E0.book Page 23 Friday, March 28, 2014 11:06 AM

«
...
29
30
31
32
33
...
»

Содержание GCH I 237































































































Отзывы:

Нет отзывов