Yamaha FZS10W Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 106

Yamaha FZS10W Скачать руководство пользователя страница 27

INSTRUMENT AND CONTROL FUNCTIONS

3-10

3

EAU26822

Brake lever

The brake lever is located at the right
handlebar grip. To apply the front
brake, pull the lever toward the handle-
bar grip.

The brake lever is equipped with a po-
sition adjusting dial. To adjust the dis-
tance between the brake lever and the
handlebar grip, turn the adjusting dial
while holding the lever pushed away
from the handlebar grip. Make sure that
the appropriate setting on the adjusting
dial is aligned with the “

” mark on the

brake lever.

EAU12941

Brake pedal

The brake pedal is on the right side of
the motorcycle. To apply the rear
brake, press down on the brake pedal.

EAU13072

Fuel tank cap

To open the fuel tank cap

Open the fuel tank cap lock cover, in-
sert the key into the lock, and then turn
it 1/4 turn clockwise. The lock will be re-
leased and the fuel tank cap can be
opened.

To close the fuel tank cap

1. Push the fuel tank cap into position

with the key inserted in the lock.

2. Turn the key counterclockwise to

the original position, remove it, and
then close the lock cover.

1. Brake lever

2. Brake lever position adjusting dial

3. “

” mark

4. Distance between brake lever and handlebar

grip

1. Brake pedal

1. Fuel tank cap lock cover

2. Unlock.

U3C311E0.book Page 10 Monday, September 11, 2006 1:18 PM

«
...
25
26
27
28
29
...
»

Содержание FZS10W











































































































Отзывы:

Нет отзывов