Yamaha FZ6RY Скачать руководство пользователя страница 64

Страница: 64 / 110

PERIODIC MAINTENANCE AND ADJUSTMENT

7-19

11. Install the coolant reservoir and its

reservoir cover by placing them in
the original position, and then in-
stalling the bolts.

12. Pour the specified amount of the

recommended coolant into the ra-
diator and reservoir.

13. Install the radiator cap.
14. Install the coolant reservoir cap.
15. Start the engine, let it idle for sev-

eral minutes, and then turn it off.

16. Remove the radiator cap to check

the coolant level in the radiator. If
necessary, add sufficient coolant

until it reaches the top of the radia-
tor, and then install the radiator
cap.

17. Check the coolant level in the res-

ervoir. If necessary, remove the
coolant reservoir cap, add coolant
to the maximum level mark, and
then install the cap.

18. Route the coolant reservoir breath-

er hose through the guide as
shown.

19. Start the engine, and then check

the vehicle for coolant leakage. If
coolant is leaking, have a Yamaha
dealer check the cooling system.

20. Install the cowlings.

EAU47460

Replacing the air filter element

The air filter element should be re-
placed at the intervals specified in the
periodic maintenance and lubrication
chart. Replace the air filter element
more frequently if you are riding in un-
usually wet or dusty areas.

1. Remove the rider seat. (See page

4-13.)

2. Remove panels B and C. (See

page 7-9.)

3. Remove the fuel tank bolts, and

then lift the fuel tank away from the
air filter case.

4. Remove the air filter case cover by

removing the screws.

NOTICE:

When removing the air filter

Antifreeze/water mixture ratio:

1:1

Recommended antifreeze:

High-quality ethylene glycol anti-
freeze containing corrosion inhibitors
for aluminum engines

Coolant quantity:

Radiator capacity (including all
routes):

2.00 L (2.11 US qt, 1.76 Imp.qt)

Coolant reservoir capacity (up to the
maximum level mark):

0.25 L (0.26 US qt, 0.22 Imp.qt)

1. Coolant reservoir breather hose
2. Guide

1. Bolt

U36P10E0.book Page 19 Thursday, November 13, 2008 4:45 PM

Содержание FZ6RY















































































































Результаты поиска

Содержание FZ6RY

Отзывы:

Похожие инструкции для FZ6RY

Бренды по названию

Популярные бренды

Yamaha FZ6RY, Руководство пользователя

Результаты поиска

Содержание FZ6RY

Отзывы:

Похожие инструкции для FZ6RY

Бренды по названию

Популярные бренды