Right handlebar
1. Install brake master cylinder holder “1” and then
tighten its bolts at specified torque.
Bolt
10Nm, 1.0m.Kg, 7 ft.lb.
3. Install throttle grip “1”, throttle cable “2” and then
right handlebar switch “3”.
TIP:
Align the projection “a” on the right handlebar switch with
the hole “b” in the handlebar.
4. Install the switch mounting screws “6” & tighten them
at specified torque.
Screw
2. Install the throttle cable “4” inside the hole “5” as
shown in illustration.
7 Nm (0.7 Kg.m, 5 ft.lb)
4
5
6
1
14
