Yamaha FZ-07 2015 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 114

background image

SAFETY INFORMATION

2-4

2

tents, can create unstable han-
dling or a slow steering re-
sponse.



This vehicle is not

d

esi

g

ne

d

to

pull a trailer or to

b

e attache

d

to

a si

d

ecar.

Genuine Yamaha Accessories

Choosing accessories for your vehicle
is an important decision. Genuine
Yamaha accessories, which are avail-
able only from a Yamaha dealer, have
been designed, tested, and approved
by Yamaha for use on your vehicle.
Many companies with no connection
to Yamaha manufacture parts and ac-
cessories or offer other modifications
for Yamaha vehicles. Yamaha is not in
a position to test the products that
these aftermarket companies produce.
Therefore, Yamaha can neither en-
dorse nor recommend the use of ac-
cessories not sold by Yamaha or
modifications not specifically recom-
mended by Yamaha, even if sold and
installed by a Yamaha dealer.

Aftermarket Parts, Accessories, an

d

Mo

d

ifications

While you may find aftermarket prod-
ucts similar in design and quality to
genuine Yamaha accessories, recog-
nize that some aftermarket accesso-
ries or modifications are not suitable
because of potential safety hazards to
you or others. Installing aftermarket
products or having other modifications
performed to your vehicle that change
any of the vehicle’s design or operation
characteristics can put you and others
at greater risk of serious injury or
death. You are responsible for injuries
related to changes in the vehicle.
Keep the following guidelines in mind,
as well as those provided under “Load-
ing” when mounting accessories.



Never install accessories or carry
cargo that would impair the per-
formance of your motorcycle.
Carefully inspect the accessory
before using it to make sure that it
does not in any way reduce
ground clearance or cornering
clearance, limit suspension travel,

steering travel or control opera-
tion, or obscure lights or reflec-
tors.

• Accessories fitted to the han-

dlebar or the front fork area can
create instability due to improp-
er weight distribution or aerody-
namic changes. If accessories
are added to the handlebar or
front fork area, they must be as
lightweight as possible and
should be kept to a minimum.

• Bulky or large accessories may

seriously affect the stability of
the motorcycle due to aerody-
namic effects. Wind may at-
tempt to lift the motorcycle, or
the motorcycle may become
unstable in cross winds. These
accessories may also cause in-
stability when passing or being
passed by large vehicles.

• Certain accessories can dis-

place the operator from his or
her normal riding position. This
improper position limits the
freedom of movement of the

«
...
12
13
14
15
16
...
»

Содержание FZ-07 2015



















































































































Отзывы:

Нет отзывов

Похожие инструкции для FZ-07 2015

G 650 X Challenge 2006

Бренд: BMW Motorrad Страницы: 131

TorqDrive Clutch Pack

Бренд: Rekluse Страницы: 18

Бренд: AFX Страницы: 112

Бренд: Yamaha Страницы: 108

Бренд: Yamaha Страницы: 114

Бренд: Yamaha Страницы: 168

Бренд: Yamaha Страницы: 497

Бренд: Yamaha Страницы: 704

Бренд: Yamaha Страницы: 84

Бренд: Yamaha Страницы: 172

Бренд: Yamaha Страницы: 80

Бренд: Honda Страницы: 123

Бренд: Yamaha Страницы: 66

Бренд: Yamaha Страницы: 100

Бренд: Yamaha Страницы: 96

Бренд: Yamaha Страницы: 106

Бренд: Yamaha Страницы: 116

Бренд: Yamaha Страницы: 120

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды