manualshive.com logo in svg

Yamaha FX SHO, Руководство пользователя, Страница: 76 / 118

Поделиться
Скачать
Yamaha FX SHO Скачать руководство пользователя страница 76

Operation

71

EJU37181

Shifting 

WARNING

EWJ01230

●

Do not use the reverse function to slow
down or stop the watercraft as it could
cause you to lose control, be ejected, or
impact the handlebars.

●

Make sure that there are no obstacles or
people behind you before shifting into
reverse.

●

Do not touch the reverse gate while the
shift lever is being operated, otherwise
you could be pinched.

To shift into reverse:
(1) Release the throttle lever and let the en-

gine speed return to idle.

(2) Pull the shift lever toward you.

To shift into forward:
(1) Release the throttle lever and let the en-

gine speed return to idle.

(2) Push the shift lever away from you.

EJU32882

Leaving the watercraft 

If leaving the watercraft, select the lock mode
of the Yamaha Security System and remove
the engine shut-off cord (lanyard) to reduce
the chance of accidental starting or unautho-
rized use by children or others. (See page 40
for Yamaha Security System lock and unlock
mode selection procedures.)

UF1W11E0.book  Page 71  Tuesday, May 27, 2008  8:50 AM

Содержание FX SHO























































































































Отзывы:

Нет отзывов