Yamaha FX Nytro FX10X, Руководство пользователя

Страница: 49 / 92

Periodic maintenance
43
ESU12770
Tool kit
The owner’s tool kit has the tools which are
sufficient for most periodic maintenance and
minor repairs. A torque wrench is also neces-
sary to properly tighten nuts and bolts.
CAUTION:
ECS00760
Before starting the engine, make sure that
the storage pouch zipper is closed com-
pletely.
NOTE:
If you do not have a torque wrench available
during a service operation requiring one, take
your snowmobile to a Yamaha dealer to
check the torque settings and adjust them if
necessary.
ESU12780
Removing and installing the
shroud and covers
Shroud
To remove the shroud
Loosen the fasteners, and then slide the
shroud forward.
To install the shroud
Hook the end of the shroud onto the front cov-
er, insert the projections on the shroud into
the slots in the headlight stay, and then tight-
en the fasteners.
Left and right side covers
To remove a side cover
1.
Remove the shroud. (See above for re-
moval procedures.)
1. Tool kit
1. Fastener
1. Shroud
U8GL10E0.book Page 43 Friday, May 18, 2007 3:17 PM