manualshive.com logo in svg

Yamaha FX Nytro FX10D, Руководство пользователя

Поделиться
Скачать
Yamaha FX Nytro FX10D Скачать руководство пользователя страница 36

Control functions

28

To raise the temperature

To raise the temperature, press the respec-
tive switch to “HI”.

To lower the temperature

To lower the temperature, press the respec-
tive switch to “LO”.
See “Fuel meter and grip/thumb warmer level
indicator” on page 24 for detailed information.

ESU10696

Auxiliary DC jack 
(FX10M53S/FX10M62S) 

The auxiliary DC jack is located in the front
panel and can be used for accessories.

TIP

The auxiliary DC jack can only be used if the
engine is running.

To use the auxiliary DC jack

1.

Start the engine.

2.

Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.

3.

After using the auxiliary DC jack, be sure
to remove the accessory power plug from
the jack and to close the auxiliary DC jack
cap.

NOTICE

ECS00122

●

To avoid circuit overload and a possible
fuse blowing, do not use accessories re-
quiring more than the maximum rated
capacity for the auxiliary DC jack. (See
page 91 for the specified fuse amper-
age.)

●

Do not use an automotive cigarette light-
er or other accessory with a plug that
gets hot because the jack can be dam-
aged.

ESU14370

Brake lever 

The snowmobile is stopped by braking the en-
tire drive system.
Squeeze the brake lever towards the handle-
bar grip to stop the snowmobile.

1. Thumb warmer adjusting switch

1. Auxiliary DC jack cap

2. Auxiliary DC jack

Maximum rated capacity:

DC 12 V, 2.5 A (30 W)

U8HKS4E0.book  Page 28  Tuesday, May 8, 2012  9:27 AM

Содержание FX Nytro FX10D



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды