![Yamaha FSW150 - YST Subwoofer - 75 Watt Скачать руководство пользователя страница 10](http://html.mh-extra.com/html/yamaha/fsw150-yst-subwoofer-75-watt/fsw150-yst-subwoofer-75-watt_service-manual_904576010.webp)
YST-FSW150/YST-FSW050
10
YST-FSW150/
YST-FSW050
3. フロントパネルASSYの外し方
* フロントパネルASSYはダボでキャビネットASSYに固定さ
れています。取り外しの際、キャビネットASSYに傷が付かな
いよう十分注意してください。
a. ブッシュ2個を外します。(Fig. 4)
※ 一度外した古いブッシュは使用できません。古いブッシュ
を外した場合、新しいブッシュに交換してください。
b. 最初にマイナスドライバーを2箇所のダボ位置へ差し込み、フ
ロントパネルASSYを押し上げます。(Fig. 4)
c. 次にヘラ等を使い、徐々に上面ヘ押し上げて、フロントパネル
ASSYを取り外します。(Fig. 4)
注意:
・ フロントパネルASSYを取り外す際、ヘラ等を使わ
ずマイナスドライバーだけを使って取り外すと、フ
ロントパネルASSYが破損する場合があります。
・ フロントパネルASSY を取り付ける場合、フロント
パネルASSYのダボに速乾ボンドなどを塗って取り
付けます。(フロントパネルASSYのダボへ速乾ボ
ンドなどを塗らずに差し込むだけでは、簡単に外れ
てしまいます。)
3. Removal of front panel ass’y
* The front panel ass’y is fixed to the cabinet ass’y with
dowels. As a flatblade screwdriver is used for removal,
use special care not to cause damage to the cabinet
ass’y.
a. Remove 2 bushings. (Fig. 4)
* Used bushing, once removed, cannot be reused. Be
sure to use a new bushing in place of the removed
used bushing.
b. First, insert a flatblade screwdriver at 2 dowel positions
and push up the front panel ass’y. (Fig. 4)
c. Next, using the metalblade or the like, push the front
panel ass’y upward until it comes off. (Fig. 4)
Note:
• Removing the front panel ass’y with the
flatblade screwdriver only without using the
metalblade or the like may cause a damage to
the front panel ass’y.
• When installing the front panel ass’y, apply
quick-drying bond or the like to dowels and
then fit them into dowel holes for secure instal-
lation. (The front panel ass’y will come off eas-
ily if its dowels are fitted into dowel holes with-
out applying quick-drying bond or the like.)
Fig. 4
Bushing
ブッシュ
Front panel ass'y
フロントパネルASSY
Metalblade
ヘラ
Flatblade screwdriver
マイナスドライバー
Dowel
ダボ
Dowel
ダボ
YST-FSW150
Bushing
ブッシュ
Front panel ass'y
フロントパネルASSY
Metalblade
ヘラ
Flatblade screwdriver
マイナスドライバー
Dowel
ダボ
YST-FSW050
Dowel
ダボ