manualshive.com logo in svg

Yamaha FJR1300AW, Руководство пользователя, Страница: 45 / 100

Поделиться
Скачать
Yamaha FJR1300AW Скачать руководство пользователя страница 45

INSTRUMENT AND CONTROL FUNCTIONS

3-29

3

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is turned on.
3. Turn the key on. 
4. Shift the transmission into the neutral position.
5. Push the start switch.

Does the engine start?

With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.

Does the engine stall?

After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.

Does the engine start?

The system is OK. 

The motorcycle can be ridden.

This check is most reliable if performed with
a warmed-up engine.

The neutral switch may be defective.

The motorcycle should not be ridden

 until

checked by a Yamaha dealer.

The sidestand switch may be defective.

The motorcycle should not be ridden

 until

checked by a Yamaha dealer.

The clutch switch may be defective.

The motorcycle should not be ridden

 until

checked by a Yamaha dealer.

YES

NO

YES

NO

YES

NO

NOTE:

U3P621E0.book  Page 29  Friday, October 20, 2006  10:29 AM

ProCarManuals.com

Содержание FJR1300AW





































































































Отзывы:

Нет отзывов