Yamaha FJR 2005 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 102

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-10

The average fuel consumption display
can be set to either “AV _ _ km/L” or
“AV _ _ L/100 km”.
When the average fuel consumption
mode is selected, the display flashes
for five seconds, and then, depending
on the unit set, “AV _ _ km/L” (average
distance that can be traveled using 1.0
L of fuel) or “AV _ _ L/100 km” (average
amount of fuel necessary to travel 100
km) is displayed.
To reset the average fuel consumption
display, push the “RESET” button to se-
lect the mode again, and then push the
“RESET” button for 1 second while the
display is flashing.

NOTE:

●

To switch between the two aver-
age fuel consumption displays,
push the “RESET” button for 1
second when either display is
shown.

●

After resetting an average fuel
consumption display, “_ _” will be
shown for that display until the ve-
hicle has traveled 1 km.

CAUTION:

ECA15471

If there is a malfunction, “– –” will be
displayed. Have a Yamaha dealer
check the vehicle.

Self-diagnosis device

This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
multi-function display will indicate a
two-digit error code (e.g., 11, 12, 13).
If the multi-function display indicates
such an error code, note the code num-
ber, and then have a Yamaha dealer
check the vehicle.

CAUTION:

ECA11790

If the multi-function display indi-
cates an error code, the vehicle
should be checked as soon as pos-
sible in order to avoid engine dam-
age.

This model is also equipped with a self-
diagnosis device for the immobilizer
system.
If any of the immobilizer system circuits
are defective, the immobilizer system
indicator light will flash, and then the
multi-function display will indicate a
two-digit error code (e.g., 51, 52, 53)
when the key is turned to “ON”.

NOTE:

If the multi-function display indicates er-
ror code 52, this could be caused by
transponder interference. If this error
appears, try the following.

1. Use the code re-registering key to

start the engine.

NOTE:

Make sure there are no other immobi-
lizer keys close to the main switch, and
do not keep more than one immobilizer

1. Error code display
2. Immobilizer system indicator light

U3P620E0.book Page 10 Tuesday, January 24, 2006 10:47 AM

ProCarManuals.com

«
...
24
25
26
27
28
...
»

Содержание FJR 2005







































































































Отзывы:

Нет отзывов

Похожие инструкции для FJR 2005

Бренд: B-PWR Страницы: 12

Бренд: kellermann Страницы: 2

Бренд: Honda Страницы: 28

Venitex BARRIER

Бренд: DELTA PLUS Страницы: 2

Бренд: GAS GAS Страницы: 131

Бренд: Thunderbike Страницы: 7

Бренд: MW TOOLS Страницы: 9

Бренд: Yamaha Страницы: 90

Бренд: Yamaha Страницы: 509

Бренд: Yamaha Страницы: 508

Бренд: Yamaha Страницы: 510

Бренд: Yamaha Страницы: 578

Бренд: Yamaha Страницы: 610

Бренд: Yamaha Страницы: 610

TT-R125(W) 2006

Бренд: Yamaha Страницы: 616

Бренд: Yamaha Страницы: 86

Бренд: G PLAST Страницы: 4

Бренд: Vanucci Страницы: 35

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды