PERIODIC MAINTENANCE AND ADJUSTMENT
7-14
7
3. Remove the air filter element by
pulling it out.
4. Check the air filter element for ex-
cessive dirt or damage and re-
place it if necessary.
5. Place the air filter element in its
original position.
6. Install the air filter case cover by
installing the screws.
Cleaning the V-belt case air filter
element
1. Place the vehicle on the center-
stand.
2. Remove the V-belt air filter case
cover by removing the bolts.
3. Remove the element by pulling it
out.
4. Clean the element with solvent,
and then squeeze the remaining
solvent out.
5. Check the element for damage
and replace it if necessary.
6. Apply oil of the recommended type
to the entire surface of the ele-
ment, and then squeeze the ex-
cess oil out.
WARNING! Use only
a dedicated parts cleaning sol-
vent. To avoid the risk of fire or
explosion, do not use gasoline
or solvents with a low flash
point.
[EWA10431]
NOTICE:
To avoid
damaging the air filter element,
handle it gently and carefully,
and do not twist it.
[ECA10521]
1. Air filter case cover (screw
×
6)
1. Air filter element (wet type)
1
ZAUU0849
1
ZAUU0850
1. V-belt air filter case cover (bolt
×
4)
1
ZAUU0851
1. V-belt air filter element
1
ZAUU0852
1YCF8199E0.book Page 14 Friday, March 22, 2013 8:34 AM