Operation
68
EMU28062
Shallow water (F4B, F5A, F6C)
EMU39891
Cruising in shallow water
WARNING
EWM02391
●
Operate the boat at the lowest possible
speed when cruising in shallow water.
Hitting an underwater obstacle could
cause the outboard motor to lift out of
the water, resulting in loss of control.
●
When cruising in shallow water, do not
operate in reverse. Reverse thrust can
cause the outboard motor to lift out of
the water, increasing the chance of an
accident and personal injury.
NOTICE
ECM00260
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU39583
Procedure for shallow water cruising
1.
Move the gear shift lever to the neutral
position.
2.
Hold the rear of the top cowling and
slightly tilt the outboard motor up until the
tilt support bar automatically locks. The
outboard motor can be operated in this
position for shallow water cruising. The
outboard motor is equipped with 3 shal-
low water cruising positions.
1. Steering friction adjuster
ZMU06834
1
1. Cooling water inlet
1. Neutral position
ZMU06819
1
1
ZMU06749
U6BV23E0.book Page 68 Tuesday, April 5, 2011 2:38 PM
