Yamaha F6, Руководство пользователя

Страница: 39 / 90

Operation
33
2. Attach the engine stop switch lanyard to
a secure place on your clothing, or your
arm or leg. Then install the lock plate on
the other end of the lanyard into the en-
gine stop switch.
WARNING
EWM00120
●
Attach the engine stop switch lanyard to
a secure place on your clothing, or your
arm or leg while operating.
●
Do not attach the lanyard to clothing
that could tear loose. Do not route the
lanyard where it could become entan-
gled, preventing it from functioning.
●
Avoid accidentally pulling the lanyard
during normal operation. Loss of engine
power means the loss of most steering
control. Also, without engine power, the
boat could slow rapidly. This could
cause people and objects in the boat to
be thrown forward.
3. Turn the main switch to “ ” (on).
4. Open the throttle slightly without shifting
using the neutral throttle lever or free ac-
celerator. You may need to change the
throttle opening slightly depending on en-
gine temperature. After the engine starts,
return the throttle to the original position.
NOTE:
●
On remote controls equipped with a neutral
throttle lever, a good starting point is to lift
the lever just until you feel resistance, then
lift slightly more.
●
The neutral throttle lever or free accelerator
can only be used when the remote control
lever is in neutral.
5. Press in and hold the main switch to op-
erate the remote choke system. The re-
mote choke switch automatically returns
to its normal position when you release
your hand. Therefore keep the switch
pressed in.
OFF
ON
ZMU01880
U60R13E0.book Page 33 Thursday, April 6, 2006 10:29 AM