Components
36
On the twin engine control, the switch on the
control grip controls both outboard motors at
the same time.
On the triple engine control, the switch on the
control grip controls all outboard motors at
the same time.
For instructions on using the power trim and
tilt switches, see pages 80 and 82.
EMU35041
Tilt limiter
This outboard motor is equipped with a tilt
limiter that controls the tilt range.
TIP:
Consult your Yamaha dealer about changing
the setting.
EMU35031
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket. Make sure that the lever is
securely retained by the bolts.
NOTICE
ECM00661
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to se-
cure it in the tilt position.
EMU35054
Cowling lock lever (turn type)
To remove the top cowling, turn the cowling
lock levers at the front and side to release
them and lift off the cowling. Reverse this
procedure when reinstalling the top cowling.
1. Power trim and tilt switch
UP
DN
1
1
UP
DN
ZMU05964
ZMU05824
6AW-9-7A-1E0.book 36 ページ ２０１３年１１月２６日 火曜日 午後７時３６分
