Yamaha F30A 2018, Руководство по обслуживанию

Страница: 309 / 348

10-4
Predelivery check
Predelivery check
To make the delivery process smooth and efficient, complete the predelivery checks as explained in
the following procedures.
Item Procedures See
Engine oil level
Check the oil level using the dipstick.
Oil is not at the proper level

Add or extract engine oil.
10-7
Battery
Check the battery electrolyte level.
Below the minimum level mark

Add distilled water.
10-7
Check the specific gravity of the electrolyte.
Below specification

Fully charge the battery.
Cooling water pilot
hole
Start the engine. —
Check that the cooling water is discharged from the cooling water
pilot hole.
Not discharged

Check the cooling system.
10-8
2-12
Main switch/stop
switch
Check that the engine starts when the engine start switch is turned
to START.
Out of specification

Check the engine start switch.
5-35
Start the engine. Check that the engine stops when the engine
start switch is turned to OFF.
Out of specification

Check the engine start switch.
5-35
Engine shut-off
switch
Check that the engine stops when the clip is removed from the en-
gine shut-off switch.
Out of specification

Check the engine shut-off switch.
5-33
Fuel line
Check the fuel line connection.
Disconnect

Connect.
2-15
Check all the fuel lines for leakage.
Leaking

Check the related parts.
Gear oil
Check the gear oil level.
Below the proper level

Add the recommended gear oil.
10-8
Shift and throttle op-
eration
Check that the gear shift operates smoothly when the remote con-
trol lever or gear shift lever is moved from the N position to the F
or R position.
Not smooth

Adjust the shift cable joints or check the related
parts.
3-6
Check that the throttle operates smoothly when the remote control
lever is moved from the F or R position to the fully open position
(remote control model).
Check that the throttle operates smoothly when the throttle grip is
turned to the fully open position (tiller handle model).
Not smooth

Adjust the throttle cable joints or check the related
parts.
3-6
Outboard motor
mounting height Check the outboard motor mounting height.
Improper

Adjust.
10-9