Yamaha F200B, Руководство по обслуживанию

Страница: 437 / 579

8-74
8
6. Remove the oil seals and needle bear-
ing. See steps 3 and 4 in “Disassembling
the propeller shaft housing assembly” (8-
16).
Checking the propeller shaft housing
1. Check the propeller shaft housing.
Replace if cracked or damaged.
2. Check the forward gear. Replace if
cracked or worn.
Checking the propeller shaft
1. Check the propeller shaft. Replace if
damaged or worn.
2. Measure the propeller shaft runout.
3. Check the dog clutch, shift rod joint, and
slider. Replace if cracked or worn.
Assembling the propeller shaft
housing assembly
• Use heat-resistant gloves. Otherwise,
burns could result.
• To prevent fires, remove any flammable
substances, such as gasoline and oil,
around the working area.
• Keep good ventilation while working.
Do not reuse a bearing, always replace it
with a new one.
1. Install a new needle bearing and oil
seals. See steps 1 and 2 in “Assembling
the propeller shaft housing assembly” (8-
18).
2. Install the original propeller shaft shims
1
and thrust bearing
2
.
TIP:
Do not reuse a shim if deformed or
scratched.
3. Install the propeller shaft housing
3
in
the reverse direction.
Propeller shaft runout:
0.02 mm (0.0008 in)
6
7
8
a
1
2
3
Propeller shaft housing (FL200B)