Yamaha F200 2015 Скачать руководство пользователя

Страница: 103 / 112

Trouble Recovery

Tilt the outboard motor up manually to
the desired position, and then tighten the
manual valve screw by turning it clock-
wise.

EMU44521

Water separator-alert indicator blinks
while cruising

WARNING

EWM02543

Gasoline is highly flammable, and its va-
pors are flammable and explosive.



Do not perform this procedure on a hot
or running engine. Allow the engine to
cool.



There will be fuel in the fuel filter. Keep
away from sparks, cigarettes, flames or
other sources of ignition.



Some fuel will spill during this proce-
dure. Catch the fuel in a rag. Wipe up any
spilled fuel immediately.



The fuel filter must be reassembled
carefully with the O-ring and filter cup in
place. Improper assembly or replace-
ment could result in a fuel leak, which
could result in a fire or explosion hazard.

If the water separator-alert indicator blinks,
perform the following procedure.
1.

Stop the engine.

Remove the top cowling.

Disconnect the water detection switch
coupler.

NOTICE:

Be careful not to get

any water on the water detection
switch coupler, otherwise a malfunc-
tion could occur.

[ECM01951]

Remove the filter cup from the filter
housing, and then remove the O-ring
from the filter cup.

NOTICE:

Be careful

not to twist the water detection switch
lead when unscrewing the filter cup.

[ECM01961]

Drain the water in the filter cup by soak-
ing it up with a rag.

Put the O-ring on the filter cup in its orig-
inal position, and then install the filter cup
onto the filter housing.

NOTICE:

1. Manual valve screw

1. Water detection switch coupler

1. Filter housing
2. O-ring
3. Filter cup
4. Water detection switch lead

ZMU07789

ZMU07790

U6DV33E0.book Page 97 Monday, December 14, 2015 2:50 PM

2019 Yamaha Motor Corporation, U.S.A.

Содержание F200 2015

















































































































Результаты поиска

Содержание F200 2015

Отзывы:

Похожие инструкции для F200 2015

Бренды по названию

Популярные бренды

Yamaha F200 2015, Руководство пользователя

Результаты поиска

Содержание F200 2015

Отзывы:

Похожие инструкции для F200 2015

Бренды по названию

Популярные бренды