Yamaha F15B, Руководство по обслуживанию

Страница: 26 / 180

SPEC
2-11 6D45F11
Specifications
Part to be tightened Thread size
Tightening torques
N·m kgf·m ft·lb
Bracket unit
Engine stop lanyard switch nut — 2.5 0.25 1.8
Grease nipple M6 3 0.3 2.2
Tiller handle bracket nut — 10 1.0 7.2
Tiller handle bracket lock nut — 23 2.3 17
Upper case mount bolt M6 12 1.2 8.7
Upper rubber mount nut M8 21 2.1 16
Lower rubber mount nut M8 32 3.2 23
Clamp bracket through nut — 22 2.2 16
Throttle grip mount screw — 3.4 0.34 2.5
Ground lead screw M6 2.5 0.25 1.8
General torques
This chart specifies tightening torques for
standard fasteners with a standard ISO
thread pitch. Tightening torque specifications
for special components or assemblies are
provided in applicable sections of this manu-
al.
To avoid warpage, tighten multi-fastener
assemblies in a crisscross fashion and pro-
gressive stages until the specified torque is
reached. Unless otherwise specified, torque
specifications require clean, dry threads.
Components should be at room temperature.
General torque
Nut (A) Bolt (B)
specifications
N·m kgf·m ft·lb
8 mm M5 5 0.5 3.6
10 mm M6 8 0.8 5.8
12 mm M8 18 1.8 13
14 mm M10 36 3.6 26
17 mm M12 43 4.3 31
6D45F11-02 03.10.9 20:42 Page 12