Yamaha EXi8, Руководство пользователя, Страница: 11 / 20

Setup
EXi 8 /EXo 8 O w ner’s Man u al 11
5. Plu g the Euroblock plu g into the [INPUT] con-
nector of the EXi8 or the [OUTPUT] connector
of the EXo8.
Here’s how to initialize the EXi8/EXo8’s internal memory,
restoring it to the factory settings.
1. Power-off the EXi8/EXo8.
2. Set the rear panel DIP switches 7 and 8 to the
“INITIALIZE” position.
3. Power-on the EXi8/EXo8.
Initialization will start.
The status of execution is shown by the [ALERT], [NET-
WORK], and [YDIF] indicators on the front panel.
• During initialization:
The [NETWORK] indicator and the [YDIF] indicator
will flash rapidly.
• Initialization completed:
The [NETWORK] indicator and the [YDIF] indicator
will flash slowly.
• Initialization failed:
The [ALERT] indicator will flash.
4. When initialization is completed, power-off the
EXi8/EXo8 once a g ain.
5. Set the rear panel DIP switches 7 and 8 to the
“RESUME” position.
6. Power-on the EXi8/EXo8 a g ain.
The EXi8/EXo8 will start up in its factory-set state.
NOTE
When connecting u n b alanced ca b les to the [INPUT] con-
nector, u se a j u mper w ire to connect the “-” and “G” of the
E u ro b lock.
+
–
G
Initializing the EXi8/EXo8
CAUTION
Do not turn off the power to the EXi8/EXo8 durin g ini-
tialization. Otherwise, a malfunction may occur
NOTE
If initialization failed, contact Yamaha representati v es /
a u thorized distri bu tors to ha v e the de v ice inspected. A list of
Yamaha representati v es / a u thorized distri bu tors appears
near the end of this man u al.