![background image](http://html.mh-extra.com/html/yamaha/ex5/ex5_owners-manual_897194162.webp)
Per
for
mance Mode
162
■
2
Cho Type (Chorus Type)
Selects the type of chorus for the Chorus unit.
❏
Settings:
00 (off)~17
For information about each type of chorus, see the
Effect Type List in the separate Data List book.
■
3
Cho
→
Rev (Chorus
→
Reverb)
Sets the send level of the signal output from the
Chorus unit, and then sent to the Reverb unit.
❏
Settings:
0~127
■
4
Rev Pan (Reverb Pan)
Sets the panning position of the signal output from
the Reverb unit.
❏
Settings:
L64 (far left)~cnt (center)~R63 (far right)
■
5
Cho Pan (Chorus Pan)
Sets the panning position of the signal output from
the Chorus unit.
❏
Settings:
L64 (far left)~cnt (center)~R63 (far right)
■
6
Rev Return (Reverb Return)
Sets the return level of the signal output from the
Reverb unit.
❏
Settings:
0~127
■
7
Cho Return (Chorus Return)
Sets the return level of the signal output from the
Chorus unit.
❏
Settings:
0~127
[F7]: REV (Reverb)
Sets various parameters for the currently selected
Reverb effect.
❏
Settings:
(Available parameters and values that can be set
depend on the type of reverb that is selected. For
more information about each type of reverb, see
the Effect Type List in the separate Data List
book.)
[F8]: CHO (Chorus)
Sets various parameters for the currently selected
Chorus effect.
❏
Settings:
(Available parameters and values that can be set
depend on the type of chorus that is selected. For
more information about each type of chorus, see
the Effect Type List in the separate Data List
book.)
[F5]: COPY
When [F7]: REV or [F8]: CHO is selected, the Copy
function will be added to the [F5] key. This Copy
function allows you to copy the reverb or chorus
setting used for the voice of the currently selected
part, and paste it as the Performance's reverb or
chorus setting.
1
Press [F5]: COPY while [F7]: REV or [F8]: CHO is
selected. The following pop-up dialog appears.
2
Press [YES] key to execute the Copy function.
Press [NO] to abort the operation, returning to
the previous screen.
3
“Completed!” momentarily appears to indicate that
the Copy function has been executed.
Performance/E/qx 5/21/98 11:35 AM Page 162