Yamaha Electone STAGEA ELB-01 Скачать руководство пользователя страница 3

Страница: 3 / 4

ELB-01 Assembly Instructions

5-2

Use the four long screws to fasten the Main unit to
the Sideboards as shown in the illustration.

Fit the Grill Net onto the Speaker.

First, align the net with the bottom line, then
secure it to the speaker assembly.

Connect the Pedalboard cord and Speaker
cord to the Main Unit.

Make sure that the latches on each plug of the
cords face toward you, and connect them to each
socket securely.

Fix the Pedalboard cord to the Sideboard
using the Pedalboard cord clamps.

8-1

Affix the two Pedalboard cord clamps to the rear
side of the Speaker unit and the lower inside of the
Left Sideboard as shown in the illustration.

8-2

Insert the Pedalboard cord in the clamps.

Long screw

Fasten the Grill Net by
inserting the knobs
into the holes.

Speaker cord

Pedalboard cord

Shut the clamp
after inserting
the cord.

Содержание Electone STAGEA ELB-01

Страница 1: ...in the correct direction by following the procedures given below Be sure to assemble the Electone with two or more people Don t use any screws other than the ones specified and included in this packa...

Страница 2: ...s between the Speaker unit and Sideboard 4 3 While holding the Sideboard s to the Speaker unit fasten the four short screws from the rear to secure the Speaker unit to the Sideboards Cover the four sc...

Страница 3: ...t the latches on each plug of the cords face toward you and connect them to each socket securely Fix the Pedalboard cord to the Sideboard using the Pedalboard cord clamps 8 1 Affix the two Pedalboard...

Страница 4: ...mbly procedures Is the Electone clear of doors and other movable fixtures Move the Electone to an appropriate location Does the Electone make a rattling noise when you shake it Tighten all screws Can...