Yamaha EF2000iS - Inverter Generator, Руководство пользователя

Страница: 11 / 526

– 4 –
7DK-012
1
2
1
2
Connection notes
9
Avoid connecting the generator to commercial
power outlet.
9
Avoid connecting the generator in parallel with any
other generator.
1 Correct
2 Incorrect
Connection
WARNING
Before the generator can be connected to a build-
ing’s electrical system, a licensed electrician must
install an isolation (transfer) switch in the build-
ing’s main fuse box. The switch is the connection
point for generator power and allows selection of
generator or main line power to the building. This
will prevent the generator from charging the main
power line (backfeeding) when the main power
supply has failed or has been turned off for line
repair. Backfeeding can electrocute or injure line
maintenance personnel. Also, generator and build-
ing electrical system damage can occur when nor-
mal operating power returns if unit is used without
an isolation switch.
Extension cord notes
Extension cords should be protected by a tough flexi-
ble rubber sheath (IEC 245) or the equivalent to with-
stand mechanical stresses.
9
Bury the ground (earth) using a steel or copper
bar into the ground more than 75 cm (29.53 in)
from the surface. The ground (earth) connection
rules may differ from country to country. Always
comply with the local regulations.
9
When the electric device is earthed, always the
generator must be earthed.
Recommended ground (earth) lead:
Cross-sectional area:
1.25 mm
2
(0.002 sq.in)
Length:
Less than 1 m (39.37 in)
2
Cross-sectional area
3
More than 75 cm (29.53 in)
2
3
7PB-F8199-U0-E0.indd 4 2013/11/08 15:15:40