Yamaha EAD10 Скачать руководство пользователя страница 17

Страница: 17 / 72

EAD10 Owner’s Manual

Panel Controls and Functions

Main Unit

Top Panel

[AUDIO/CLICK VOLUME] knob

Adjusts the volume for AUX IN (aux-
iliary input) and Click functions—any
sound or audio you play along to.

Function Buttons 1–3
(page 33) ([F1], [F2], [F3])

Selects the functions that
appear at the bottom of each
screen.

Display (page 33)

Displays a variety of informa-
tion.

[SCENE] knob (page 33)

Switches between the dif-
ferent sound sets.
Or, returns to the Scene
screen from other screens.

NOTE

The knob can be used in the same manner as the
[–] and [+] buttons. For more information, refer to the
Reference Manual (Advanced) (PDF) (MENU/Utility/
General).

[

] (Standby/On) switch (page 25)

Switches the power between standby (off) and
on.

[MENU] button

Accesses the advanced settings
screen. For more detailed informa-
tion, refer to the Reference Manual
(Advanced) (PDF).

[REVERB] knob (page 33)

Adjusts the reverb level.

[EFFECT] knob (page 33)

Adjusts the amount of Effect applied to the
audio signal from the mic sensor.

[TRIGGER] knob (page 33)

Adjusts the Trigger Sound volume.

[STORE] button (page 37)

Opens the Store screen. Stores Scenes
that you have created.

[–] button,
[+] button

Increases or
decreases the
value by one (1).

[

] (Click) button (page 39)

Accesses the Click (Metronome)
screen. The button flashes in
sync with the Click tempo.

[RECORDER] button (page 41)

Accesses the Recorder (record/play-
back) screen. The button lights while
recording or during playback.

[EXIT] button

Cancels the action, or returns to the screen one level higher.
Press several times to return to the Scene screen.

NOTE

When in the Scene Screen, this button can also be used as a
Panic Button to stop any sounds.

[

] (Sensor Unit) button

(page 27)

Accesses the Sensor Unit
screen. Set the mic sensor level
so that the button occasionally
flashes when hitting the drums
strongly.

[MASTER VOLUME] knob

Adjusts the overall volume.

Содержание EAD10









































































Результаты поиска

Содержание EAD10

Отзывы:

Похожие инструкции для EAD10

Бренды по названию

Популярные бренды

Yamaha EAD10, Руководство пользователя

Результаты поиска

Содержание EAD10

Отзывы:

Похожие инструкции для EAD10

Бренды по названию

Популярные бренды