Screen Functions
25
y
LOCK
Shows the Dante Device Lock status. Use the Dante Controller to configure settings.
“LOCKED” will appear when the lock setting is applied, and “UNLOCKED” will appear
when the lock is released. When locked, you will not be able to change Dante settings.
u
DDM (Dante Domain Manager)
This shows the status of any DDM servers on the network, and domain participation
status.
•
STATE:
Shows the domain participation status.
-
DOMAIN:
Participating in a domain.
-
DISCONNECTED:
Participating in a domain, but not connected to a DDM server.
-
UNMANAGED:
Not participating in a domain.
•
LOCAL:
Shows the access status for Dante settings (including DANTE PATCH) con-
figured for this product currently in use.
-
READ WRITE:
Changes permitted.
-
READ ONLY:
Changes not permitted.
NETWORK
Configures network settings used to control this product with an external device. The set-
tings changed will be applied after restarting this product.
q
UNIT ID
Sets an ID assigned so that DZR-D or DXS-XLF-D series devices on the Dante network
can be recognized individually. See “UTILITY Screen” – “
DANTE SETUP” – “
w
UNIT
ID”
.
w
IP SET. (IP SETTING)
Select how the IP address is set.
•
UNIT ID:
Set to 192.168.0.### (### = UNIT ID).
•
DHCP:
Sets an IP address assigned from the DHCP server. The IP address, NET-
MASK and GATEWAY will be retrieved automatically. If the DHCP server is not on the
network, a link-local address (169.254.xxx.xxx) will be used.
•
STATIC IP:
Sets an IP address manually.
e
IP ADR.
Shows the IP address. Use this to set the IP address if STATIC IP is selected as the IP
SET. setting.
r
NETMASK
Shows the subnet mask. Use this to set the subnet mask if STATIC IP is selected as the
IP SET. setting.
t
GATEWAY
Shows the default gateway. Use this to set the default gateway if STATIC IP is selected
as the IP SET. setting.
y
MAC
Shows the MAC address. This address is shown for reference and cannot be changed.
Dante model
e
w
r
t
y
q
When using this product while connected to a CL series or QL series device, set a different
address using the same subnet as the IP address set on the FOR DEVICE CONTROL on the
mixer.
NOTE
