Yamaha DXR12, Руководство пользователя

Страница: 13 / 22

80 DXR15/DXR12/DXR10/DXR8/DXS15/DXS12 Owner’s Manual
References
Italiano
Español
F
rançais
Deutsc
h
English
References
Specifications
General DXR15 DXR12 DXR10 DXR8 DXS15 DXS12
System Type 2-way, Bi-amp Powered Speaker, Bass-reflex Type Powered Subwoofer, Band-pass Type
Frequency Range (-10dB) 49Hz – 20kHz 52Hz – 20kHz 56Hz – 20kHz 57Hz – 20kHz 45Hz – 160Hz 47Hz – 160Hz
Coverage Angle H90° x V60° Constant Directivity Horn –
Crossover Type FIR-X tuning
™
(Linear Phase FIR Filter) –
Crossover Frequency 2.1kHz 2.1kHz 2.3kHz 2.4kHz –
Measured Maximum SPL (peak)
IEC noise@1m 133dB SPL 132dB SPL 131dB SPL 129dB SPL 132dB SPL 131dB SPL
Transducer DXR15 DXR12 DXR10 DXR8 DXS15 DXS12
LF Diameter 15" Cone 12" Cone 10" Cone 8" Cone 15" Cone 12" Cone
Voice coil 2.5" 2.5" 2" 2" 2.5" 2.5"
Magnet Ferrite
HF Diaphragm 1.4" –
Type 1" Throat Compression Driver –
Magnet Ferrite –
Enclosure DXR15 DXR12 DXR10 DXR8 DXS15 DXS12
Material, Finish, Color ABS, Matte Black Wood, Paint, Black
Floor Monitor Angle 50° Symmetrical 50° Symmetrical 50° – –
Dimensions
(WxHxD, with rubber feet) 445×700×380 mm
(17-1/2" x 27-1/2"
x 15") 362×601×350 mm
(14-1/4" x 23-5/8"
x 13-3/4") 305×502×310 mm
(12" x 19-3/4"
x 12-1/4") 280×458×280 mm
(11" x 18" x 11") 478×618×624 mm
(18-7/8" x 24-3/8"
x 24-1/2") 397×563×594 mm
(15-5/8" x 22-1/8"
x 23-3/8")
N et Weight 22.5kg (49.6lbs) 19.3kg (42.5lbs) 14.6kg (32.2lbs) 13.5kg (29.8lbs) 38.0kg (83.8lbs) 33.0kg (72.8lbs)
Handles Aluminium die-cast (Side x 2) Aluminium die-cast (Top x 1) Metal (Side x 2)
Pole Socket 35mm with 2-way feature (0 or 7 degree) 35mm (Top)
Rigging points Top x 2, Rear x 1
(Fits for M10 x 18mm eyebolts) Top x 2, Rear x 1
(Fits for M8 x 15mm eyebolts) –
Optional Accessory (U-bracket) UB-DXR15 UB-DXR12 UB-DXR10 UB-DXR8 –
Amplifier DXR15 DXR12 DXR10 DXR8 DXS15 DXS12
Amplifier Type Class-D Class-D
Power Rating
*1
Dynamic 1100W (LF: 950W, HF: 150W) 950W
Continuous 700W (LF: 600W, HF: 100W) 600W
Cooling Fan cooling, 4 speeds
AD/DA 24bit 48kHz sampling
Signal Processing 48bit (Accumulator: 76bit)
HPF/LPF OFF, 100, 120Hz 24dB/oct HPF 80, 100, 120Hz 24dB/oct LPF
DSP preset D-CO N TOUR: FOH/MAI N , MO N ITOR, OFF D-XSUB: BOOST, XTE N DED-LF, OFF
Protection Speaker Clip limiting, Integral Power Protection, DC-fault
Amplifier Thermal, Output over current
Power supply Thermal, Output over voltage, Output over current
Connectors Input I N PUT1: XLR3-31 x 1, I N PUT2: Phone x 2 (Unbalanced),
I N PUT3: RCA PI N x 2 (Unbalanced)
I N PUT: XLR3-31 x 2
Output THRU: XLR3-32 x 1 (Parallel with I N PUT1), LI N K OUT: XLR x1 THRU: XLR3-32 x 2 (Parallel with I N PUT)
Input
Impedance I N PUT1 LI N E: 12kΩ, MIC: 8kΩ 10kΩ
I N PUT2, 3 L, R: 40kΩ, MO N O: 20kΩ –
Input Sensitivity
(LEVEL:
Maximum) I N PUT1 LI N E: +1dBu, MIC: -32dBu +1dBu
I N PUT2, 3 -13dBu –