19
CONNECTIONS
PREP
ARA
TION
English
Connecting to an external
amplifier
If you want to increase the power output to the speakers,
or want to use another amplifier, connect an external
amplifier to the 6CH PREOUT jacks as follows.
Note
• When you have connected this unit to an external amplifier,
select PRE in “9 SP/PRE OUT” on the SET MENU. (See page
63.)
1
FRONT jacks
Front channel line output jacks.
2
REAR jacks
Rear channel line output jacks.
3
CENTER jack
Center channel line output jack.
4
SUBWOOFER jack
Low bass signals distributed from the front, center and/or
rear channels are directed to this jack if they are assigned
to this jack. (The cut-off frequency of this jack is 90 Hz.)
The LFE (low-frequency effect) signals generated when
Dolby Digital or DTS is decoded are also directed if they
are assigned to this jack.
y
• The adjustments made in the following settings have an effect
on the signals output from the 6CH PREOUT jacks.
– BASS BOOST settings
– Speaker settings
– DSP programs
FRONT
CENTER
6CH PREOUT
REAR
SUBWOOFER
1
2
3
4
Connecting the AC power cord
Plug in this unit to the wall outlet.
■
Memory back-up
The memory back-up circuit prevents the stored data from
being lost when the power cord is disconnected from the
AC outlet, or the power supply is temporarily cut due to
power failure. However, if the unit is turned off for more
than one week, the stored setting will be cleared. If so, set
the setting again.
• Volume level
• Input source
• Speaker output level (center, rear L/R and subwoofer)
• Sleep timer
• Parameter
• Delay time
• Set menu
• Disc direct
• Preset station
Turning on the power
When all connections are complete, turn on the power of
this unit.
1
Press STANDBY/ON (POWER (
) on the
remote control) to turn on the power of this
unit.
2
Turn on the video monitor connected to this
unit.
Note
• When you use only some of the included 6 speakers or when
using commercially available speakers, adjust speaker mode
settings soon after turning the power on. See “1 SPEAKER
SET (speaker mode settings)” on page 60 for details.
STANDBY/ON
STANDBY/ON
TV
CH
INPUT
TUNER
MUTE
CD–R
VCR
VIDEO 2
VIDEO 1
MD
AV
SLEEP
POWER
TV MODE
POWER
VOL
REC
AUDIO
SUBTITLE
SHIFT
CODE SET
1
HALL
2
JAZZ
3
ROCK
4
ENTERTAINMENT
DVD
CD
AMP
POWER ( )