DVD setup menu options
39
En
O
N
-SCREEN M
E
NU
5
Engl
ish
[CHROMA DELAY]
The chroma (color) and luminance (brightness) signals are
not synchronized. You can adjust the advance delay of the
chroma signal to yield a perfectly clear picture. This
function is not available for HDMI output.
You can adjust the value from -3 to +3.
1
Select [ADV PICTURE] in [VIDEO SETUP PAGE].
2
Press
/
to highlight [CHROMA DELAY],
then press
.
3
Press
/
to select a setting and press
ENTER
to
confirm.
[WIDE SCREEN FORMAT]
Set the aspect ratio of the projected images on the screen.
This function is only available for progressive scan and
HDMI output.
1
Select [ADV PICTURE] in [VIDEO SETUP PAGE].
2
Press
/
to highlight [WIDE SCREEN
FORMAT], then press
.
NL STRETCH
Select this to display a 4:3 image on the 16:9 screen
with non-linear stretching (center position of screen is
stretched less than the sides).
4:3 PILLAR BOX
Select this to display a 4:3 image on the 16:9 screen
without stretching.
OFF
No aspect ratio adjustment is made when this option is
selected.
3
Press
/
to select a setting and press
ENTER
to confirm.
[HDMI VIDEO]
Set the resolution depending on the monitor you are using.
This function is only available when you connect the
DVD receiver to an HDMI compatible component via the
HDMI terminal.
1
Select [ADV PICTURE] in [VIDEO SETUP PAGE].
2
Press
/
to highlight [HDMI VIDEO], then
press .
480P
480 progressive-scan video
576P
576 progressive-scan video
720P
720 progressive-scan video
1080I
1080 interlace video
1080P
1080 progressive-scan video
AUTO
The resolution is automatically selected to match the
component you are using.
3
Press
/
to select a setting and press
ENTER
to confirm.
– For settings other than [AUTO], HDMI video
signals may not be output properly if a resolution
output setting is not supported by the HDMI
component you are using. In this case, follow the
steps below to change [HDMI VIDEO] to [480P].
– If a disc is inserted, press
to eject the disc.
– Press .
– Press
AUDIO
.
Do not perform this operation while playing back a
disc on the DVD receiver.
Notes
