DVD-C940/DV-C6680
10
Top Cover
1
3
2
Tray
HOW TO MANUALLY EJECT THE TRAY
1. Remove the Top Cover.
2. Move the gear in the anti-clockwise direction
with your finger until the tray is ejected.
3. Gentlely pull the tray out.
4
Fig. 2
Fig. A
●
Precaution for installation of the Tray Ass'y.
On Tray Ass'y setting.
Check the Direction of marking “
▲
” on gear
according to this drawing.
Gear/L0
Front Panel
Gear/L01
Marking
1. Removal of Tray Ass'y
a. Remove 1 screw (
r
) in Fig. 1.
b. Turn Gear/L0 as shown in Fig. 2 counter clockwise
gradually until immediately before the tray starts to
move and stop it there.
Tray
Gear/L0
Fig. 1
2. Removal of Table
a. Remove 2 screws (
t
) and then remove the
Support/M in Fig. 3.
b. Remove the Plate/Table in Fig. 3.
c. Remove 1 screw (
y
) and then take off the Table in
Fig. 3.
IMPORTANT: Installation of Table.
Install the table according to the following procedure.
1) Slide the Lever so that the Gear/RT becomes
free. (Fig.B)
2) With the “
▲
” mark on the Gear/RT aligned
with the same mark on the Tray, lock it with
the Lever. (Fig.B)
3) Install the Table by aligning it to the thick line
on “
/
” mark. (Fig.3)
*Check that the Table is locked after installation.
Lever
Tray
Gear/RT1
Fit the Gear/RT to “
▲
” mark.
Fig. B
Fit the table to the thick line on “
/
” mark.
t
Plate/Table
Fig. 3
y
Table
Lock
Unlock
t
Support/M
w w w . x i a o y u 1 6 3 . c o m
Q Q 3 7 6 3 1 5 1 5 0
9
9
2
8
9
4
2
9
8
T E L
1 3 9 4 2 2 9 6 5 1 3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
